Euchner AS-i 3.0 Command Interface Manual do Utilizador descarregar pdf (Página 56)

AS-i 3.0 Command Interface Commands of the Command Interface

Subject to reasonable modifications due to technical advances Id.-No.: 102875 Issue date - 3.12.2007 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316

The OFFLINE = TRUE bit is not permanently stored; in other words, following a

cold/warm restart, the AS-i Master is once again in the online mode.

The master changes to the offline phase, if there is a 1 written in byte 3.

The master will change to online mode if there is a 0 written in byte 3.

4.6.7 Release data exchange (SET_DATA_EX)

4.6.8 Rewrite DPRAM (REWRITE_DPRAM)

This command is used for the rewriting of the DPRAM.

Request

byte

10A

2T – circuit

3Off-Line

Response

byte

10A

2T result

Request

byte

148

2T – circuit

3 Data_Exchange_Active

Response

byte

148

2T result

!!!

The command REWRITE_DPRAM is valid only for the use with

AS-i 3.0 Module OEM Master.

Request

byte

178

2T – circuit

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 97 98

Sem comentários

Euchner AS-i 3.0 Command Interface Manual do Utilizador Página 56