Euchner AS-i 3.0 Command Interface Manual do Utilizador descarregar pdf (Página 13)

AS-i 3.0 Command Interface Commands of the Command Interface

Subject to reasonable modifications due to technical advances Id.-No.: 102875 Issue date - 3.12.2007 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316

4.1.3 Write 1 16-bit Slave out. Data (WR_7X_OUT)

With this command, the four 16-bit channels of an AS-i output slave according to

the slave profile (S-7.3, S-7.4, S-7.5, S-7.A.8, S.A.9, S-7.A.A) can be written.

4.1.4 Read 1 16-bit Slave out. Data (RD_7X_OUT)

With this command, the four 16-bit channels of an AS-i output slave according to

the slave profile (S-7.3, S-7.4, S-7.5, S-7.A.8, S.A.9, S-7.A.A) can be read.

Request

byte

151

2T – circuit

3 – 0 slave address

4 channel 1, high byte

……

11 channel 4, low byte

Response

byte

151

2T result

Request

byte

152

2T – circuit

3 – 0 slave address

Response

byte

152

2T result

3 channel 1, high byte

……

10 channel 4, low byte

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 97 98

Sem comentários

Euchner AS-i 3.0 Command Interface Manual do Utilizador Página 13