Euchner AS-i Safety Output Relay with four standard inputs Manual do Utilizador descarregar pdf (Página 18)

Subject to reasonable modifications due to technical advances Id.-No.: 103573 Issue date - 28.5.2009 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316

AS-i Safety Output Relay with four standard inputs

Safety Requirements

7. Safety Requirements

• The device uses two redundant, force-guided relays.

• The module recognizes if one of the relays does not switch (for instance if the

contacts are welded).

• The contact sets 1.13/1.23 and 1.14/1.24 use the same relay; they do not

operate independently.

• The contacts 1.13, 1.23, 1.14, 1.24 are potential-free. A cross-short check is

not available.

• If the device is set up to control two independent safety contactors, con-

nected in series, the connection between the safety contactors and the

device must never be subjected to another potential as this could result in the

inadvertent activation of the safety contactors.

• Input 1.Y1, just like inputs I1... I3, is a standard AS-i input.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Sem comentários

Euchner AS-i Safety Output Relay with four standard inputs Manual do Utilizador Página 18