Euchner CES-I-AP-M-C04 (Multicode) Manual do Utilizador descarregar pdf (Página 14)

Operating Instructions Safety Switch CES-I-AP-M-C04

Connection

Connect the device as shown in Figure 3. The OD output can also be connected

to a control system as a monitoring output.

Important!

The subsystem CES-I-AP complies with PL e in accordance with EN 13849-1. To

integrate the subsystem in a category 3 or 4 structure, it is necessary to monitor

the downstream load (the feedback loop must be monitored).

These examples show only an excerpt that is relevant for connection of the CES

system. The example illustrated here does not show complete system planning.

The user is responsible for safe integration in the overall system.

GND

DC 24 V

-F1

CES-I-AP-...-SB-...

FO1A

FO1B

M12 plug-connector

(5-pin)

0V UB

-V1

-K1

-V2

-K2

-M1

L2 L3

Figure 3: Connection example CES-I-AP-M-C04-SB

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sem comentários

Euchner CES-I-AP-M-C04 (Multicode) Manual do Utilizador Página 14